| The Q&A on this Product |
| |
| |
| QUESTION: i have a 1996gsxr750.what will make it easy to pop the front wheel |
| ANSWER: go down 1 in the front and go 2 up in the rear if the front change is not enogh |
| |
| QUESTION: I have a 2003 GSX600F Katana. The bottome end is kind of sluggish. What's the best front/back sprocket to pick up the bottom end with the least effect to the top end? |
| ANSWER: go to a 14 front |
| |
| QUESTION: Where would I go to get this, "speedo healer"? |
| ANSWER: try google |
| |
| QUESTION: Hi, I have a 1997 GSXR 600 and am hoping to replace the sprockets and chain. What is the stock for this model? |
| ANSWER: 16 45 x 110 link chain |
| |
| QUESTION: I have a 07 GSXR 600 and want alot more acceleration out of it. What is the stock tooth count and what should I change to to get that bottom end pick up? I understand the speedo will be off and I have read about the speedo fixer. Do you have those for my bike? |
| ANSWER: stock is 16 45 you can go to a 15 x 48 but you will need a new chain |
| |
| QUESTION: i have a 2002 katana 600, i would like to have more speed, and i would like for it to wheelie easier what would you suggest? |
| ANSWER: 14-49 WILL DO THE TRICK |
| |
| QUESTION: I have a 04 750 gsxr, i want to put it on the track and want to know what the best sprocket/chain setup would be. basically looking for the best of all worlds, best acceleration, not too much top end lost, and easy to pick up for wheelies still. and what is the stock set up? if you could provide the part number i'd appreciate it. thanks |
| ANSWER: IN WILLOW SPRINGS,FONTANA,AND IFINION ALL OUR GUYS RUN 15-43,44 SO I WILL SAY THIS IS IT |
| |
| QUESTION: i own a 2007 gsxr 600 , blows for weelies, i was wonder if you could tell me a good set for the front and back, i belive the stock is 16-43,im trying to pull up in second gear , as a power weelie, but also have a good high speed |
| ANSWER: 15 45 WOULD WORK GOOD |
| |
| QUESTION: I have a 2005 GS500F. The front 16T sprocket that is on it now is all one piece with what looks like a "raised built on spacer" around the centre on one side. The other side is smooth. Do you carry this sprocket for the 2005 GS500 or can I put a 16T sprocket on that is smooth on both sides like my local bike shop is telling me will not make a difference? |
| ANSWER: the correct part number is 1084-520-16 |
| |
| QUESTION: I have a 04 750 I wanted a sprocket change that would give me more acceration and the ability to pick it up easier...but just take me down to like 150(or roughly around there) on the top speed? I always hear of people gettin -1 or -1 +2 but I never hear too many people gettin -1 +1 which seems like it would be in the middle of the two? Is it the middle? |
| ANSWER: THE 1 UP IN THE REAR BALLANCE THE -1 IN THE FRONT ALSO KEEP IN MIND THAT 1 TOOTH IN THE REAR IS A VERY SMALL DIF |
| |
| QUESTION: I have a 06GSXR 750 I was wondering what is my stock sprocket count front and rear? And what can I change it to if I wanted basically how far down can I go in the front and how far up can I go in the rear... |
| ANSWER: 17-45 IS STOCK YOU PROBEBLY DON'T WANT TO GO BELOW 14 FRONT THE REAR 54 WILL BE THE SAFEST |
| |
| QUESTION: On a 05 DL 650 V Strom, what would be the kit to replace the factory chain & sprockets? Didn't get what that mesnt: OEM: 15 - 520 Conversion ONLY |
| ANSWER: orignal equipment=oem stock on that bike is 15-47 525 pitch you can order the parts: 5017-525-47t rear sprocket 0002-525-15 front sprocket 525 srx 120 links chain |
| |
| QUESTION: I have an 06' gsxr 600 and I just changed my front sprocket from a 16 to a 15, how much off will my speedometer be and which way? |
| ANSWER: about 10-15 mph more then what the real speed is. you can get a speedo healer to correct this |
| |
| QUESTION: Addition to question about 06 GSXR 600 16 front 45 rear set up. Is this a good choice(set up)any pro's/cons,would it be a beneficial.Where could I get instructions on removal and installation. Thanks. |
| ANSWER: NO CONS OTHER THEN YOUR SPEEDO WILL BE SLIGHTLY OFF.PROS BETTER ACCE NO FLAT SPOT ETC BEST BANG FOR THE BUCK. REPAIR MANUEL,SHOP MANUEL OR TAKE IT TO YOUR LOCAL DEALER AND ASK TO WATCH AND LEARN OR TRY IT YOURSELF |
| |
| QUESTION: I have a 2006 GSXR 600 and was wondering what effect would a 45 rear and 16 front gear set up have on my bike as far as performance and speedo. |
| ANSWER: IT WILL GIVE YOU MORE BOTTOM END AND YOUR SPEEDO WILL NOT BE ACCURATE. DRIVEN RACING |
| |
| QUESTION: Hi, I have a Suzuki SV1000. It has pipes, airbox, computer mods & now its time for gearing. I beleive it is lower geared than the TLS, but I want more to keep up with GSXR's in the Canyons. I was thinking a 520 Conversion with 17 - Front & 43 or 44' - Rear. What do you recommend? |
| ANSWER: you already have plenty of tourqe so if you go to a 44 you may have too much stock is 17-40 i wouls say 17-42 would be best and a 520 kit will lightend things up for sure. DRIVEN RACING |
| |
| QUESTION: I have an 02 gsxr 600 and i just changed my front sprocket to 15 teeth and now my speedometer is WAY off. its says like 10 mph when im going 30 (for example) and it constantly bounces around, never holds steady. my friend has a 03 750 gsxr and he put the 15 on his front and his speedometer (while maybe less accurate) is holding steady and seems to work. am i stuck with a WAY off crazy speedometer or is there anything i can do to at least make it not bounce around so much? i feel like i broke my bike. its so bad off its not worth it, even thought i get great off the line speed. i was under the impression i would just lose top end speed. mine is so bad i might as well not have a speedometer. tell me is there anything i can do? than you. peterwaec@yahoo.com |
| ANSWER: your speedo should be off you can use speedo healer to fix that but just fyi its not accouret to begin with.(the sprocket is not the problem) as for the speedo being "bouncy" check your battery terminal connection make sure they are tight, also check the speedo sensor on your sprocket cover make sure its stright and not not loose,make sure the pickup on the fr sprocket nut is in good shape and not broken, on your speedo there is a diagnostic check botton see if it will give you a reading as to what problem it senses(check with your suzuki dealer for the code). put a volt meter on your battary make sure the charging system is working properly. all the steps should tell you what the problem is so give it a try. good luck DRIVEN RACING |
| |
| QUESTION: i have a 2004 gsxr 600 k4 and i want much more acceleration what sprockets should i go with the stock is 16 front 45 rear? |
| ANSWER: YOU CAN GET THE RACE KIT WITH 15-46 OR YOU CAN GET 47,48 ETC, DRIVEN RACING |
| |
| QUESTION: I HAVE 92 KATANA AND I AM REPLACING FRONT AND REAR SPROCKETS WITH CHAIN I WOULD LIKE TO REDUCE THE # OF TEETH OF THE REAR FOR A REDUCE IN RPM'S SHOULD I REPLACE THE FRONT ONE WITH LESS TEETH TOO? PLEASE HELP THANKS KEVIN |
| ANSWER: NO THAT WILL GIVE YOU THE OPPOSITE EFFECT STAY WITH THE REAR DRIVEN RACING |
| |
| QUESTION: I HAVE A 1993 GSX 600 F SUSUKI KATANA I NEED A REAR AND FRONT SPROCKET. DO YOU HAVE IT AND HOW MUCH. |
| ANSWER: 14-45 in 530 part number 0007-530-14 for the front $29.95 5068-530-45 for the rear $42.95 that is the stock size |
| |
| QUESTION: What is the smallest size front engine sprocket you can get for an 03 gsxr600? |
| ANSWER: 14 tooth DRIVEN RACING |
| |
| QUESTION: i have a 03 gsxr600 and want to go 1 down in the front and 2 up in the rear will it wheelie fairly easy? |
| ANSWER: IT SURE WILL! DRIVEN RACING |
| |
| QUESTION: I have an 06' SV650s, stock with a Yosh slip-on. I would like to punch up the acceleration a bit with a sprocket kit. I do quite a bit of riding in town during the week, but on the weekends I hit the freeway and the canyons. What would be the best sprocket combo to work with? (Great in town/backroads, reasonable RPMs in 6th on the highway). |
| ANSWER: best thing would be a 15-47 in 525 or you can get a 520 conversion kit call customer service and they can build it for you . DRIVEN RACING |
| |
| QUESTION: I have an 04 gsx-750, what side front and rear sprocket would make it to do wheelies? |
| ANSWER: 15-47 will make it easy to pop the front wheel but you can also go higher on the rear .keep in mind the bigger you go the more top end speed you are going to loose. DRIVEN RACING |
| |
| QUESTION: i have an 02 gsx-r 750 what size front and rear sprocket would make it work better? |
| ANSWER: 16-43 OR 44 WOULD WORK GREAT. MORE LOW END AND WOULDN'T LOSE TOO MUCH TOP END. driven racing |
| |
| QUESTION: i have an 01' GSXR600 with a rear sprocket(45 teeth), how many teeth should a get for the front? |
| ANSWER: 15 DRIVEN RACING |
| |
| QUESTION: dose the number of teeth on the front sprocket make that much of a difference? if so which is better for an 01' GSXR600 rear sprocket 45 teeth |
| ANSWER: 45 is stock if you go 1 down in the front it will make every thing work better DRIVEN USA |
| |
| QUESTION: I have a 97 TL1000s and want to replace sprockets and chain, what are the stock teeth counts for the front and rear sprockets? |
| ANSWER: The 97 tl 1000S STOCK GEARING IS 17-38 530 PITCH . |
| |
| QUESTION: do you carry a 14T sprocket for an 02 katana? |
| ANSWER: YES WE DO PART # 71-530-14 CALL CUSTOMER SERVICE TO ORDER NOAM AVRAHAM DRIVEN USA |
| |
| QUESTION: HOW MANY TEETH DOSE A STOCK SPROCKET HAVE AND HAOW MANY CAN I LOSE BEFORE IT MESSES W/ MY SPEDO |
| ANSWER: HI THERE YOU DIDN'T SPECIFY WHAT YR MODEL,ETC BIKE YOU HAVE BUT FYI ANY TIME YOU CHANGE YOUR GEARING,TIRE SIZE OR PROFILE YOU MESS WITH YOUR ALREADY NOT ACCURATE SPEEDOMETER. Noam Avraham DRIVEN USA |
Add new post
