| The Q&A on this Product |
| |
| |
| QUESTION: is there a kit for the 07 gsxr yet |
| ANSWER: THE 07 GSXR 1000 STEERING DAMPENER IS TOO CLOSE TO THE HID HIGH BEAM BULB, I DO NOT RECCOMEND INSTALLING AN HID KIT ON THE 2007, HOWEVER, IF YOU MUST THEN THE 2006-2007 600/750 KIT WILL WORK. |
| |
| QUESTION: Hi there, I only need the H7 single HID Kit for low beam. What is the relevant part number and how much will this cost? |
| ANSWER: the part # is H7HID it is $190.00 |
| |
| QUESTION: How easy is this kit to install? Where do you put the ballasts,ignitors, etc.? Also reguarding the little parking lights on the sides of the headlight, are there bulbs that will replace those to match the color of the new headlight? |
| ANSWER: the ballasts on this kit installs in the rear of the bike. we do offer the running lights. they are s0507gsxr1kRL. thanks |
| |
| QUESTION: I have a 2007 gsxr-1000 dose this kit come with 2 bulbs one for low beams and one for high beams i woud like bolth to be HDI and is the kit plug and play no wire cuting? and will this kit work on the 07 gsxr 1000? |
| ANSWER: WILL NOT FIT 07. THE 2007 LOW BEAM BULB HITS THE STEERING DAMPNER. ALSO THEY ARE DIFFERENT BULB TYPES. THIS KIT IS ONLY FOR 2005-2006 |
| |
| QUESTION: Two questions: I just bought a new GSX1300R Suzuki motorcycle (the "Hayabusa" type). It is the 2006 model (frame no JS1A1111200120534) for exportation from Japan to Germany. The bike has 2 halogen lamps, low beam on top (mirror reflecting), and lens type below (for the high beam). 1) I know xenon systems have a "lag" period of 1-3 seconds when turned on. Therefore the "pass" signal (operating the high beam and most of the time operated only momentarily) will not function properly with xenon lamps. Is this correct? 2) Your listings do not include xenon kit for the GSX1300R. Only for the GSXR1000R (05-06). Does this kit fit to the 1300? P.S: There is no problem with state/province regulations regarding the motorcycle lamps here. I live in Greece, and nobody checks the lamp’s wattages. Therefore I would like to install the highest output available. Thanks in advance for your reply. |
| ANSWER: you cannot install a higher wattage bulb, as it will destroy the stator plate or melt wiring. HIDs draw less power and product 300% more light. The pass function will still work. there should be a gsxr 1300 listed. |
| |
| QUESTION: Is there a problem of melting of the plastic. I know that these bulbe get hot. |
| ANSWER: these bulbs run cooler than stock... so NO |
| |
| QUESTION: The GSX-R1000 05-06 have 2 low beams bulbs!!! Does this kit come with 2 bulbs for the low beams or do i have to purchase another H-7 bulb!!! Only want low beams not high!!! High beams or pointless when having the low beam HIDS... |
| ANSWER: the 05-07 gsxr-1000 has one bulb for high beam and one bulb for low beam. IT MOST DEFINATELY IS NOT POINTLESS TO HAVE 2 HID BULBS. The low beam uses a reflector to direct the beam DOWN. But if you need just one bulb, buy the h7 or 9005 single hid kit. h7 is low, 9005 is high. |
| |
| QUESTION: is this kit for the low beam and high beam or just he low beam? |
| ANSWER: this kit to for both the high and the low beam |
| |
| QUESTION: 1. what color is the light beam? 2. is there a choice of colors? 3. do i have to swap out the entire system or can i swap out the bulbs only? thanks |
| ANSWER: 6000k only (pure white)... you must install the ballasts, ignitors, and bulbs. |
| |
| QUESTION: do you have hid kit for 04 gsx r 1000. if not do you know where i can get some? |
| ANSWER: please verify that the two bulb types are h4 / h7, yes we have them |
Add new post
